Top of the page

RC TD4/TD2 CARBON DAMPER STAY

Item No. 22061
This Hop-Up Option part is for use on the Tamiya TD4 and TD2 chassis. The carbon fiber reinforced plastic part (4mm thick) ensures increased rigidity and precise damper setup compared to the stock FRP plastic part included in the kit. Item Contents/Information β€’ Carbon Damper Stay (Rear) x1 β€’ 3x10mm

Description

This Hop-Up Option part is for use on the Tamiya TD4 and TD2 chassis. The carbon fiber reinforced plastic part (4mm thick) ensures increased rigidity and precise damper setup compared to the stock FRP plastic part included in the kit.

Item Contents/Information
β€’ Carbon Damper Stay (Rear) x1
β€’ 3x10mm Hex Head Screws x4
β€’ 3x8mm Countersunk Hex Head Screws x2
β€’ 3x18mm Hex Head Screws x2
β€’ 2mm Aluminum Spacers x2
β€’ 5mm Ball Connectors x2
β€’ Nylon Lock Nuts x2
β€’ Wing Stays x2
β€’ 2mm higher attachment compared to normal allows effective use of optional dampers such as big bore dampers.
β€’ Wing stays are useful for higher rear wing attachment for downforce.
β€’ Compatible with TD4 and TD2 chassis cars.

RC TD4/TD2 CARBON DAMPER STAY

Item No. 22061
This Hop-Up Option part is for use on the Tamiya TD4 and TD2 chassis. The carbon fiber reinforced plastic part (4mm thick) ensures increased rigidity and precise damper setup compared to the stock FRP plastic part included in the kit. Item Contents/Information β€’ Carbon Damper Stay (Rear) x1 β€’ 3x10mm

Description

This Hop-Up Option part is for use on the Tamiya TD4 and TD2 chassis. The carbon fiber reinforced plastic part (4mm thick) ensures increased rigidity and precise damper setup compared to the stock FRP plastic part included in the kit.

Item Contents/Information
β€’ Carbon Damper Stay (Rear) x1
β€’ 3x10mm Hex Head Screws x4
β€’ 3x8mm Countersunk Hex Head Screws x2
β€’ 3x18mm Hex Head Screws x2
β€’ 2mm Aluminum Spacers x2
β€’ 5mm Ball Connectors x2
β€’ Nylon Lock Nuts x2
β€’ Wing Stays x2
β€’ 2mm higher attachment compared to normal allows effective use of optional dampers such as big bore dampers.
β€’ Wing stays are useful for higher rear wing attachment for downforce.
β€’ Compatible with TD4 and TD2 chassis cars.