Top of the page

RC LOW FRICTION KING PIN BALLS

Item No. 22016
These are 7mm suspension balls for use on the Tamiya TC-01 and TA-08 chassis. The balls are lighter than the standard steel balls, which help reduce un-sprung weight in the suspension system. β€’ TA08 Low Friction King Pin Balls x4 β€’ Use in place of 7mm suspension balls and king-pins. β€’ Aluminum compo

Description

These are 7mm suspension balls for use on the Tamiya TC-01 and TA-08 chassis. The balls are lighter than the standard steel balls, which help reduce un-sprung weight in the suspension system.

β€’ TA08 Low Friction King Pin Balls x4
β€’ Use in place of 7mm suspension balls and king-pins.
β€’ Aluminum components (changed from kit-standard steel) feature a hard anodized finish to enhance rigidity.
β€’ One king pin ball gives a weight reduction of about 0.4 grams, which helps reduce un-sprung weight, for improved performance.
β€’ Can be used either front or rear. (Requires two sets to fully setup one kit.) Use one king pin ball at top and bottom for each upright.
β€’ When using this Hop-Up Option, replacing (TC-01 C/D Parts (Suspension Items 51663) (2pcs.) and 51669 (TA08 D Parts (Suspension Arms) 2pcs. is recommended.
β€’ Compatible with the TC-01 and TA08 PRO (Item 58693) chassis cars.

RC LOW FRICTION KING PIN BALLS

Item No. 22016
These are 7mm suspension balls for use on the Tamiya TC-01 and TA-08 chassis. The balls are lighter than the standard steel balls, which help reduce un-sprung weight in the suspension system. β€’ TA08 Low Friction King Pin Balls x4 β€’ Use in place of 7mm suspension balls and king-pins. β€’ Aluminum compo

Description

These are 7mm suspension balls for use on the Tamiya TC-01 and TA-08 chassis. The balls are lighter than the standard steel balls, which help reduce un-sprung weight in the suspension system.

β€’ TA08 Low Friction King Pin Balls x4
β€’ Use in place of 7mm suspension balls and king-pins.
β€’ Aluminum components (changed from kit-standard steel) feature a hard anodized finish to enhance rigidity.
β€’ One king pin ball gives a weight reduction of about 0.4 grams, which helps reduce un-sprung weight, for improved performance.
β€’ Can be used either front or rear. (Requires two sets to fully setup one kit.) Use one king pin ball at top and bottom for each upright.
β€’ When using this Hop-Up Option, replacing (TC-01 C/D Parts (Suspension Items 51663) (2pcs.) and 51669 (TA08 D Parts (Suspension Arms) 2pcs. is recommended.
β€’ Compatible with the TC-01 and TA08 PRO (Item 58693) chassis cars.